Any small spec. shall not be tolerated
because the drawing determines the quality and maketability of
all components and complete vehicles. Therefore, in initial design
stage, basic characteristics must be acquired by performing qualitative
test methods on function, size, intensity and durability of components
and system.
Also, to satisfy the needs of customers and target maketability,
tests shall be repeated in various methods on vehicles in each
development stage(prototype, PP, and MP vehicle). And the problems
shall be found and improvement activities shall be taken.
Finally, maketability of products shall
be tested from the viewpoint of customers and the completion of
development activities shall be determined by studying strong
and weak point of complete vehicles or perfroming comparing-analysis
of vehicles with rival ones. Therefore,
KAES provide test & evaluation
service from long time experiences with specific test program
for preventing leak of defects in design and achieving target
quality of product.
|
DESIGN
|
Marketability / Customers' needs
|
Design
verification
by detailed test items
|
Development target verification
&
Developing competitive marketability
|
|
|
Component
Test
|
|
System
Test
|
|
Vehicle Test
(Prototype / Pilot product / Mass product)
|
Initial quality evaluation
|
|
Target performance confirmation
|
|
Marketability evaluation
|
|
|
OBJECTIVE TEST
|
OBJECTIVE TEST
+
SUBJECTIVE TEST
|
SUBJECTIVE TEST
|
|
KAES Service
|
¤ý
|
searching and extracting problems
of design by detailed test items.
|
¤ý
|
planning & programming
for improvement suggestion, target quality,
and target delivery timing. |
¤ý
|
subjective & objective
evaluation developing by experiences and
professional technologe |
TEST
PLANNING |
|
We provide
test planning service including test items, test methods,required
equipments, manpower and a period for the design suitability check
up and the target quality of developing vehicles and components. It
includes essential events presetting for qualityverification and
related activity methods. |
Master
Test Plan
|
Mechaproto
Stage
|
Prototype
Stage
|
Engineering
Sign Off
|
Pliot
Product Stage
|
Product
Validation
|
Mass
Product Stage
|
TEST
PROCEDURE & MANUAL |
|
We provide
service of test methods and work procedures required forcomplete
vehicles and components to be developed. It shall minimize trials
and errors expected from developing them on one¡¯s own and save time
and cost. We provide optimal testprocedure and manual considering
your company¡¯s test capabilityand market situation. |
|
Vehicle
Performance Test
|
|
Durability
Test
|
Environment
Test
|
Marketability
Test
|
GERNERAL
PERFORMANCE TEST |
|
We provide testing service for confirmation
of developmenttarget, comparison with rival vehicle, and improving
problems. All testing are performed in official test centerof Korea
or yours.
|
|
- Engine Power Perfromance |
|
|
- NVH |
|
- Ride & Handling |
|
- Air Con & Heating
etc. |
MARKETABILITY
ASSESSMENT |
|
We perform subjective evaluation
with detailed checkitems by specialist from customers¡¯ view. This
provides toconfirm development target and achievement of thistarget.
- Dynamic State Assessment
- Static State Assessment
|
COMPONENT
TEST |
|
|
To satisfy characteristics
of components required by vehicles, we provide confirmation of problems
andimprovement solutions by testing of function, endurance,and strength.
All testing are performed in official testcenter of Korea or yours.
|
|
PRODUCT
VALIDATION TEST |
|
This is the required
test program for confirmingquality before mass production and guarantee
theafter market. This program is usually performed atPP stage. Tests
consist of safety, regulation, andtarget quality confirmation. |
DURABILITY
PROGRAM |
|
It provides test program including
driving mileage, driving conditions(road,driving mode) and check
items according to characteristics of vehicles. It ensuresdurability
characteristics of complete vehicle and system, and component by
real roadtest and simulation test.
- General Durability
- Acceleration Durability etc.
|
BASE
QUALITY EVALUATION |
|
Through detailed and
gradual quality testing from prototype to mass product, It meets target
quality by confirmation of design suitability and suggestions for
problem solutions. |
Copyright ¨Ï 1999-2001
by Korea Automotive
Engineering Service
All Rights Reserved.
|
|